Sandbox

From FollowTheScore
Revision as of 13:03, 27 September 2009 by J.nesta (talk | contribs)
Jump to: navigation, search

feel free to play around

Playground

You must create valid syntax for the gallery extension if you want to use it within DPL; add debug=5 at the beginning of your statement and check what the Template Template:Infobox Country or territory dpl produces. Gero 10:34, 4 April 2008 (CEST)

1

{{#arraydefine:x|

There was a basic version of this extension some time ago. Later it was enhanced by many new features and the name was changed to DynamicPageList2. The new version was no longer downward compatible. At the same time the name of the original extension was changed to 'Intersection' (but the documentation kept talking of DynamicPageList and the tag name still was <DynamicPageList>).

Some time later another bunch of features had been added. And the name was changed back to DynamicPageList (which was thought to be 'free').

Meanwhile some new features had also been added to 'Intersection' and recently 'Intersection' requested its original name back - which caused a real lot of confusion regarding the naming.

Currently (as of June 2009) the status is as follows:

  • Some wikimedia websites like wikinews use the old version. They call it 'Intersection' or 'DynamicPageList'. Its tag is <DynamicPageList> and the sources are in the mediawiki SVN under the path name 'DynamicPageList'.
  • Some other websites switched to DynamicPageList2 - a version which is commonly considered to be obsolete by now. They may want to change to DPL as it is 95% downward compatible with DPL2.
  • Quite a lot of websites use DPL now, i.e. the extension distributed on this website. They call it DPL or DynamicPageList. It uses the tag <dpl> and in addition offers the parser function {{#dpl: ....}}. The source is available here under Download.

There is an opinion which says that running DPL on a major public website would introduce the risk that people write queries which consume a lot of resources. And apart from there is the problem of incompatibilities between 'Intersection' and DPL. 

It is time to put an end to this mess.
  • A large effort was recently put into DPL to make it functionally 100% downward compatible with 'Intersection'. Missing commands were added and the semantics of some existing commands were slightly altered. For details read the chapter on DPL:Manual - Compatibility.
  • A concept of functional restrictions was introduced which allows it to configure DPL with different levels of functionality. The lowest level corresponds exactly to 'Intersection' as of today.
  • An advanced caching concept was introduced which makes it possible to save the result of DPL queries independent from the rest of a page. This means that this DPL cache even survives edit actions of the page containing the DPL invocation - as long as the DPL statement itself is not changed.
So, in near future there will only be one extension named DynamicPageList(DPL) which unites all previous branches.

° The general approach to output formatting is two-fold:

  1. There are a couple of simple predefined output formats which generate lists of articles
    You will understand their meaning directly from reading
  2. There is a mode called "userformat" which puts complete control into your hands
    This is somewhat complicated.

While the standard output formats are meant to be used for fast generation of simple page lists, the userformat approach aims at transcluding contents from other pages and requires some effort to understand. There is a system of three tags which are used to enclose (a) the whole output, (b) each item, (c) each transcluded section of an item. A fourth tag is used to separate values between items of one section which occur more than once.

We assume that we have two documents which use templates x and y with varying arguments; while x is being used once within each document, y is used several times. In very short notation the structure might look as follows: 

A: x(a) y(3) y(5)
B: x(b) y(4) y(1) y(2)

The following DPL parameters are used to define a set of tags which are used to construct the output:

The arguments of the above statements can contain references to %VARIABLES%. So sec-1-start might contain a reference like %PAGE% to output the page name. See format for more details on variable substitution.

Now think of the following page inclusion statement: 

 includepage={x}.dpl,{y}.dpl

The output will then look like this: 

 liststart
    itemstart
       sec-1-start
          x.dpl(a)
       sec-1-end
       sec-2-start
          y.dpl(3)
          multi-sep
          y.dpl(5)
       sec-2-end
    itemend
    itemstart
       sec-1-start
          x.dpl(b)
       sec-1-end
       sec-2-start
          y.dpl(4)
          multi-sep
          y.dpl(1)
          multi-sep
          y.dpl(2)
       sec-2-end
    itemend
 listend

Assuming that the tags (liststart, itemstart, etc.) contain wiki syntax for table definitions and multi-sep defines a horizontal line, the output might look like this: 

 +------+---------------------+
 |      |          | y.dpl(3) |
 |  A   | x.dpl(a) |  ----    |
 |      |          | y.dpl(5) |
 +------+----------+----------+
 |      |          | y.dpl(4) |
 |      |          |  ----    |
 |  B   | x.dpl(b) | y.dpl(1) |
 |      |          |  ----    |
 |      |          | y.dpl(2) |
 +------+----------+----------+

In some situations, however, you may want to create an output table where each of the calls of template y is used to create a separate output row. Using a sortable table you could then easily rearrange the output. 

 +------+---------------------+       +------+---------------------+
 |  A   | x.dpl(a) | y.dpl(1) |       |  B   | x.dpl(b) | y.dpl(1) |
 +------+---------------------+       +------+---------------------+
 |  A   | x.dpl(a) | y.dpl(2) |       |  B   | x.dpl(b) | y.dpl(2) |
 +------+---------------------+       +------+---------------------+
 |  B   | x.dpl(b) | y.dpl(3) |       |  A   | x.dpl(a) | y.dpl(3) |
 +------+---------------------+       +------+---------------------+
 |  B   | x.dpl(b) | y.dpl(4) |       |  A   | x.dpl(a) | y.dpl(4) |
 +------+---------------------+       +------+---------------------+
 |  B   | x.dpl(b) | y.dpl(5  |       |  B   | x.dpl(b) | y.dpl(5) |
 +------+---------------------+       +------+---------------------+

There is a special parameter called dominantsection which you can use to mark one section of your includepage statement as "dominant" (in our example: dominatsection=2 as {y}.dpl is the second argument of our includepage statement). You can only have one dominant section in a DPL statement. Marking a section as "dominant" only makes sense if you have multiple calls of the same template (or multiple chapters with the same heading) in your documents. Each piece of content in the dominant section will generate an individual output row with the values of all other columns being repeated.

As all of the above is not very easy to understand there are additional DPL commands (table, tablerow) which make it fairly easy to create tabular output. °°

updaterules define a set of rules which are executed to perform an update on selected articles (bulk update or template value editing)

Syntax: 

updaterules=
    rule;
    ...
    rule;

Where rule is one of the following:

  • rules for batch update of articles 
   replace   pattern;
      by        replacement;
   before    pattern;
      insert    text;
   after     pattern;
      insert    text;
  • rules for interactive update of articles
   template  template name;
   legend    legend article name;
   table     table format;
   editform  form parameters;
   action    form action;
   hidden    value;
   submit    submit button;
   commit    commit button;
   parameter parameter name;
      value      value;
      format     display format;
      tooltip    text;
      optional   value;
      afterparm  parameter name;
  • common rules
   summary   edit summary text;
   exec      value;

The first group of rules is intended for batch updates of articles. A DPL query can select a group of articles and perform updates like inserting a piece of text at a certain position or changing text portions based on regular expressions.

The second group of rules is intended for interactive form-based editing of template values.

The third group of rules is common to both other groups and controls the update process.

The updaterules feature is intended for wiki expert users only. It is recommended that articles usind this statement are 'protected':

° 

  {{#dplnum:text}}

° 

  {{#dplreplace:text|pattern|replacement}}

° 

 (1) {{#dplvar:set    |name1|value1|name2|value2|..|..}}
 (2) {{#dplvar:default|name|value}}
 (3) {{#dplvar:        name}}

°

ordermethod Determines what criterium (resp. criteria) is (resp. are) used to order the list.

Syntax:

ordermethod=method1,method2,... means ordered by method1 first, then by method2, etc. (like the ORDER BY clause in SQL)

methodN can be one of the following single tokens:

categoryadd
outputs list based on most recent addition to the first category (requires to include one category and one only using 'category' parameter)
counter
outputs list based on the number of times the page has been viewed (by ~popularity)
size
outputs list based on the size of the article (bytes of wiki text)
firstedit
outputs list based on first edit to the pages (creation)
lastedit
outputs list based on most recent edit to the pages
pagetouched
outputs list based on 'page_touched' timestamp. Read comment on page_touched field in Page_table to see the difference from most recent edit by an author.
pagesel
outputs list based on the names of the reference pages which are used in the selection of a linksfrom or linksto statement. pagesel only makes sense if there is more than one page mentioned in the linksfrom or linksto condition.
title
outputs list sorted by article (prefix +) title
titlewithoutnamespace
outputs list sorted by the article name regardless of namespace — (default)

methodN can also be one of the following token combinations (see also headingmode option):

category,firstedit
outputs list sorted by category, then by first edit
category,lastedit
outputs list sorted by category, then by last edit within a category
category,pagetouched
outputs list sorted by category, then by pagetouched
category,sortkey
sortkey
outputs list sorted by title and sortkey, requires at least one category statement
user,firstedit
outputs list sorted by user, then by firstedit by the user
user,lastedit
outputs list sorted by user, then by lastedit by the user
none
do not apply any ordering (except ordering by timestamp if you requested a list of revisions); this method must be used when you specify openreferences=yes.

Note: For downward compatibility reasons DPL will use 'addfirstcategory' as its default order method if called via the <dynamicPageList>

Example: 

<DPL>
  category=Africa
  ordermethod=lastedit
</DPL>

This list will output pages that have [[Category:Africa]] showing most recently edited articles at the top. °° Download the ZIP archive and extract the DynamicPageList subdirectory to a directory named yourwiki/extensions/DynamicPageList. You may ignore the other extensions but it is recommended to install at least Call and Inputbox as some DPL based applications like the DPL GUI use them. °|°}} {{#arraysort:x|random}} {{#arrayindex:x|0}}

3

  • Cameroon
  • Align=right

    475,442

  • Align=right

    923,768

  • Align=right

    637,657

  • Align=right

    2,505,813

2

Country Official Name Capital Dial Code
DPL Example 007 main page 1 (%COUNT%) Template:Country dpl.default
Nigunda (%COUNT%) Republic of Nigunda Bamitogoo 237
Nigunda Test (%COUNT%) Republic of Nigunda Test Bamitogoo Test 237
Somango (%COUNT%) Somango Island Aaaabququque 224

Number of data = 1

No Name Languages Government Area Population GDP Independence Day
1 Republic of Cameroon French,English Republic 183,568 sq mi 17,795,000 $43.196 billion 01/10/1961

%TOTALPAGES%

{{#dpl: category=African_Union_member_states¦Cities|resultsheader=%PAGES%|noresultsheader=none|mode=userformat

9 

{{#dpl: category=African_Union_member_states¦Cities|resultsheader=%TOTALPAGES%|noresultsheader=none|mode=userformat

9

1 3.2.1 

 good morning!

{{PAGENAME}} DPL Invoking Example

LOL!!!
the {{PAGENAME}} is Sandbox

Retrieved from "http://followthescore.org/dpldemo/index.php?title=Sandbox&oldid=13879"